Australian company CBH benefits from use of Falling Number instruments

CBH Group, one of Australia's largest grain organisations, declares a gain of several million AUD thanks to an increased use of Falling Number tests.

In a harvest like the present one where rain damage occurs, a thorough use of Falling Number tests on incoming grain has lead to upgrading from Feed to General Purpose or even milling grades such as APW and H2 on individual loads. This would not be possible if testing would only be done by visual inspection or by spot-check samples from silos.

Please find below the full November 14th News from CBH Group and a link to their web page.

For more information on the Falling Number test, please click here.

For more information about CBH, please click here.

 

Falling Numbers test adds millions to grain value (CBH press release, published Nov 14, 2011)

Grain growers have already gained $7.5 million of increased value for their crops this harvest due to CBH Group's mobilisation of Falling Number machines to accurately test incoming grain for rain damage.

CBH has deployed more than 80 Falling Number machines to its receival sites in the regions most affected by unseasonal heavy rain and storms since the start of harvest. More than 100 machines will be in use by the peak of the harvest.

Under the official Grains Industry of Western Australia Wheat Receival Standards and the Grain Trade Australia standards used in Eastern Australia any load in which sprouted grain is detected is classified as feed grade unless a Falling Number result is available to override the sprouted grain result.

Through the use of Falling Number machines, CBH is able to upgrade loads with sprouted grain from Feed to General Purpose or even into milling grades such as APW and H2.

CBH General Manager Operations, Colin Tutt, said load-by-load testing ensures the highest possible classification as the Falling Number result over-rides the visual presence of sprouted grains. It is the only mechanism that allows potential Feed to be upgraded to higher value milling grades.

"So far CBH has tested 3500 individual loads with an estimated value uplift of $7.5 million," Mr Tutt said.

"Given we are only 10 per cent of the way through the expected harvest, the value of having this service available to growers is very clear."

Mr Tutt said the Falling Number testing takes between 5-10 minutes per load.

"While the extra time can be frustrating at busy receival sites, we ask growers to be patient because it's likely to be worth the wait. It can be the difference between a Feed or higher grade classification.

"Our Falling Number machines are here to create value for our growers and that is exactly what they will be doing this harvest. Our aim is to not have to downgrade any load to feed based on visual sprouted alone, however this will be increasingly difficult as seasonal conditions deteriorate in a number of areas across the state."

CBH Customer Quality Manager Dr Richard Williams said sprouted grains contained damaged starch and protein components resulting in poor quality end products.

"Bread made from flour with sprouted wheat can have a very dark crust and a sticky interior, or in severe cases the loaf may have a hollow interior," Dr Williams said. "Noodles made from sprouted wheat will be sticky, and in some cases disintegrate during the cooking process."

Dr Williams said CBH's management plan combining load-by-load testing with site monitoring enabled the best possible classification for growers' wheat deliveries while maintaining WA's reputation to supply quality wheat.